Overview & Features
1.1 CNC System -Fanuc OiTF+ with 10.4" Colour Monitor
1.2 AC Spindle Motor: 5.5/7.5 kW
1.3 A2-5 Spindle (Cartridge Type)
1.4 Spindle speed range:40 - 4000 rpm
1.5 LM Guide ways on X & Z Axis
1.6 Directly Coupled Axes Motors
1.7 Hydraulic Turret - 8 Station - Biadirectional(Indegenous)
1.8 25 X 25 mm (Turning Tool Shank Size)
1.9 Dia 40 Boring ToolMount - 4 No's(Standard - 2 No's & Thru coolant Mount - 2 No's)
1.10 Axia Tool Mount (Face Grooving Holder)-1 No's
1.11 Reduction sleeves Dia 40/32, Dia 40/25, Dia 40/16, Dia 40/12, Dia40/10 - Each 1 No
1.12 Taper shank Drill sleeves Dia 40/MT2 & Dia 40/MT3 - Each 1 No
1.13 Dia 165 mm X 3 Jaw Power Operated Hollow chuck (1.5mm X 60deg serration) along with one set of Hard Jaws and Soft Jaws with Solid Rotary Cylinder with semi hollow draw tube (Seom or Equivalent)
1.14 Tailstock with Hydraulic operated Quill and External Revolving centre
1.15 Electronic Handwheel - Manual Pulse Generator (MPG)
1.16 Oriented Spindle Stop (M19)
1.17 Hydraulic Power Pack
1.18 Foot Switch for Chuck & Tailstcok
1.19 Centralized Oil Lubrication System for LM Guide and Ballscrew
1.20 Standard Coolant system with rear side coolant tank, Chip tray and Pump (RKM252/205)
1.21 Totally Enclosed Machine Guard
1.22 Tri Colour Lamp
1.23 Machine Lamp
1.24 One set of Maintenance Tool Kit & Machine manual in English
1.25 Standard Machine Packing (MultiWrap packing with Wodden Base Plate)
| TECHNICAL SPECIFICATIONS - ORBITUR+ | |||||||
| Description | Unit | Specifications | |||||
| Swing Over Bed | mm | 500 | |||||
| Swing Over Carriage | mm | 270 | |||||
| Admit between centre distance | mm | 400 | |||||
| Standard truning diameter (between centre) | mm | 270 | |||||
| Maximum turning diameter (disc - 80 mm length) | mm | 300 | |||||
| Maximum turning length (between centre) | mm | 400 | |||||
| Maximum turning length (from Hard Jaw face) | mm | 325 | |||||
| Interference free turning diameter (tool collision diameter with adjacent tool holders) | mm | 230 | |||||
| Standard Chuck Size | mm | 165 (200*) | |||||
| Maximum bar capacity | mm | 45 | |||||
| Turret | type | Hydraulic | |||||
| No of stations | No's | 8 | |||||
| Spindle Nose | type | A2-5 | |||||
| No of bearings - Front | No's | 3 | |||||
| No of bearings - Rear | No's | 2 | |||||
| Spindle speed | rpm | 4000 (3000*) | |||||
| Spindle motor power continuous / intermittent | Kw | 5.5 / 7.5 | |||||
| X axis stroke | mm | 165 (+150 / -15) | |||||
| Z axis stroke | mm | 425 | |||||
| Rapid traverse X / Z axis | mm / min | 30 / 30 | |||||
| Tail stock quill type | type | MT-4 | |||||
| Tailstock quill diameter | mm | 80 | |||||
| Tailstock quill stroke | mm | 100 | |||||
| Positioning accuracy (as per ISO 230-2 standard) | mm | 0.007 | |||||
| Repeatability (as per ISO 230-2 standard) | type | 0.005 | |||||
| Machine dimension (W x D x H) - Floor space | mm | 2050 x 1400 x 1600 | |||||
2.1 Rear side Chip conveyor with Chip Bin - Slat type for steel or curly type chips in lieu of standard coolant tank and chip tray
2.2 Rear side Chip conveyor with Chip Bin - Scrapper type for cast iron or powder type chips in lieu of standard coolant tank and chip tray
2.3 ? 165 mm x 3 Jaw Power Operated Hollow chuck (1.5mm x 60 deg serration) along with one set of Hard Jaws and Soft Jaws with Hollow Rotary Cylinder with hollow draw tube in lieu of Standard chucking system (Seoam)
2.4 ? 200 mm x 3 Jaw Power Operated Hollow chuck (1.5mm x 60 deg serration) along with one set of Hard Jaws and Soft Jaws with Solid Rotary Cylinder with semi hollow draw tube in lieu of Standard Chuck and Cylinder (Seoam) & RPM will be limited to 3000.
2.5 ? 200 mm x 3 Jaw Power Operated Hollow chuck (1.5mm x 60 deg serration) along with one set of Hard Jaws and Soft Jaws with Hollow Rotary Cylinder with hollow draw tube in lieu of Standard Chuck and Cylinder (Seoam) & RPM will be limited to 3000.
2.6 A.C. Unit for Electrical Cabinet
| Sr No. | Pre-Commissioning Details | Download |
|---|---|---|
| 1 |  |
